I'm not a musician but I do have an equipment problem!
I have a pair of Tannoy Fusion 4 speakers. The terminals on back of speakers are the "binding post" variety where you turn a screw to hold the speaker wires to make contact with the terminals. In this case, my speaker wires are Monster Cable with the metal "pins" instead of bare speaker wire.
It's a royal pain when you have to move the speakers or clean the back of them periodically and re-connect the speakers, because the cables/wires don't hold very firmly in the terminals and come loose very easily. And of course if you got loose/bad connections you got bad sound from your stereo.
Any tips to rectify this problem? Thanks!